Balancing machine is very common in life, so what are its fundamental steps? Small series summed up a few points, we can refer to oh. The main performance of the balancing machine is expressed by the two comprehensive indicators of the small reachable residual unbalance and the unbalance reduction rate. The former is the small value of the residual unbalance reached by the rotor by the balancing function.

It is the index of balancing machine high balance ability; The latter is the ratio of the unbalance reduced after a correction to the initial unbalance, which is an indicator of balancing efficiency and is generally expressed as a percentage. So, what are the operating steps of the balancing machine? Let's take a look at it.

Place the workpiece - open the host - press ESC key - Home directory - Select rotor parameters - select the graphic shape - Measure the workpiece size (r1,r2,a,b,c,) - Calculate the eccentricity and vibration size - enter the data of the rotor parameters -ESC- Home directory - calibration - enter the calibration parameters (calculate the vibration size /r1 or r2* ( 3-10x).

Use an electronic balance to measure two pieces of the same weight of the calibration mass added to the zero position - start the beginning test (test 3 times) - to re-test (remove the weight test 3 times) - the computer automatically calculates the weight and Angle to be weighted - to find balance (according to the parameters of the computer prompts on the workpiece weight test until balance) the above is the operating steps of the balancing machine, I hope I can help you.